The fiberglass mesh cloth is made of glass fiber woven fabric and is coated with polymer emulsion. So it has good alkali resistance, flexibility and high tensile strength in longitude and latitude, and can be widely used in building internal and external wall insulation, waterproof, crack resistance and so on.
It is widely used in:
1) Wall reinforcement materials (such as glass fiber wall mesh, GRC wallboard, EPS internal and external wall insulation board, gypsum board, etc.),
2) Reinforced cement products (such as Roman column, flue, etc.),
3) Granite, mosaic special mesh, marble back paste mesh,
4) Waterproofing membrane cloth, asphalt roof waterproofing,
5) Reinforcing the skeleton materials of plastic and rubber products,
6) Fireproof board,
7) Grinding wheel base cloth
8) Geogrid for highway pavement,
9) Construction caulking belt and so on
Construction method:
1. Keep walls clean and dry.
2. Apply adhesive tape to the crack and press it tightly.
3. Make sure that the gap is covered by the tape, then cut off the extra tape with a knife, and finally brush with mortar.
4. Let it air dry, then polish it gently.
5. Fill in enough paint to make the surface smooth.
6. Remove the leaking tape. Then, pay attention that all cracks have been properly repaired, and use fine composite materials to decorate around the repaired joints to make them as clean as new.
Post time: Jul-12-2021