How to quickly identify the clay crucible drawing fiberglass production line

Earthenware glass fiber production line uses earthenware crucible as drawing plate, which is essentially different from platinum crucible drawing line and pool kiln drawing line. But for ordinary people who are not very familiar with the glass fiber industry, the ceramic crucible wire drawing production line and platinum crucible wire drawing production line is really somewhat “similar”, especially for the production of the ceramic crucible wire drawing production line, the clay crucible leakage plate is difficult to distinguish with platinum alloy leakage plate at high temperature.

 1

How to quickly distinguish between clay crucible drawing production line and platinum crucible drawing production line, can be quickly screened from the following aspects:

One is to look at the bottom of the drawing leakage plate installation design and supporting facilities. Platinum alloy leakage plate is used in the crucible drawing production line instead of platinum. Due to its long service life, leakage plate brick will be equipped with auxiliary facilities such as water cooling pipe installed at the bottom of leakage plate. The clay crucible drain plate used in the ceramic crucible wire drawing production line, its service life is generally about one day, need to be frequently replaced, so the clay crucible drain plate is easy to install, the bottom of the drain plate without water cooling pipe and other auxiliary facilities.

 2

The second is to see the melting furnace structure. The drawing furnace of platinum crucible wire drawing production line is generally built with refractory materials and shaped like cube. During production, glass ball raw materials are added into the furnace for melting and homogenizing wire drawing. Clay crucible wire drawing production line melting furnace is relatively simple, generally only with refractory bricks or clay bricks piled into a melting pool, open at the top, easy to add broken glass and other raw materials, the bottom of the high temperature melting liquid is clearly visible.

 3

Three is to see the use of raw materials. Instead of platinum crucible wire drawing production line uses glass ball as production material. Clay crucible wire drawing production line mostly uses waste broken glass as raw material, and the factory is generally equipped with waste glass cleaning equipment. Of course, there are also glass ball clay crucible production line, but if the raw material used in the production line is broken glass, it must be clay crucible wire drawing production line.

 4

The production and use of clay glass fiber will bring many safety, environmental protection and social problems. To this end, we must resolutely strike and completely eliminate the backward production capacity of clay crucible wire drawing, and lay a solid foundation for the high-quality development of the industry transformation.

图片5

ABOUT US

hebei Yuniu Fiberglass Manufacturing Co., LTD. We mainly produce and sell e-type fiberglass products, such as fiberglass roving, fiberglass chopped silk, fiberglass chopped felt, fiberglass gingham, needled felt, fiberglass fabric and so on.If any needs, please contact us freely.

Post time: Dec-30-2021